How does a loopback tester work?

Your cart is empty, why not try searching for products ?

Please visit our website for more information on this topic.

Not getting a link?

A loopback test eliminates superfluous connections and confirms that a transceiver or port is functioning properly by connecting the transmitter and receiver of the same module. It requires a self-contained loopback module or a single strand of fiber. Creating a single strand of fiber out of a duplex cable takes a couple of extra steps.

1. Select Cabling

2. Remove collar and isolate both ends of the same strand of cable

How to perform and confirm a loopback test using a single strand of fiber:

1. Install transceiver or loopback module into switch. (If testing a module with a 40km or greater reach utilize the appropriate optical attenuator).

2. If using a loopback module the Tx and Rx ports will be connected to each other, if using a transceiver install the isolated ends of the same strand of cabling to the transmit and receive ports of the transceiver.

Link to Wirenet

3. Once the ports are connected review the status of the link light. If lit, the port of hardware is functioning properly. If not, further troubleshooting is necessary.

Self-contained loopback module

Loopback created with single fiber strand

In conclusion, a loopback test is an easy way to confirm that your current hardware is working properly. There are many other factors involved including cabling, connection points and other network appliances but this technique will allow you to rule out those factors and confirm the functionality of your hardware.

Loopback testing involves sending a signal from a source back to itself, essentially creating a closed loop. By eliminating redundant connections and interferences, with a loopback test it is possible to check and assess the functionality of the device, switch&#;s port, or internal configuration.

In simple terms: loopback test provides an easy way to see if the transceiver or the port of the device works properly.

Are you interested in learning more about Custom Fiber optic loopback testers Supplier? Contact us today to secure an expert consultation!