Home > Chemicals > What are the advantages of potassium formate drilling fluid ...

What are the advantages of potassium formate drilling fluid ...

Author: yongtuo

Nov. 04, 2024

8 0

Tags: Chemicals

What are the advantages of potassium formate drilling fluid ...

Potassium formate drilling fluid is widely used in well drilling because of its good solubility, high density, low solid phase, low viscosity and good compatibility. What are the advantages of potassium formate drilling fluid system? The factory tells you.

Read more


(1) Wetting the weighting agent with a small amount of water and adding a proper amount of glue liquid during weighting can keep the high-density potassium formate system low viscosity and low water loss.


(2) There are representative rock samples of Anjihaihe formation and tasihe formation in the southern margin of Junggar basin. The potassium formate drilling fluid prepared in the laboratory has good inhibition on them, and the drilling fluid system has good rheological property, which is suitable for the formation conditions in the southern margin of Junggar basin, and has certain practical value.


(3) Potassium formate system has strong ability of resisting calcium and solid-phase pollution, which is good for drilling complex intervals.


(4) After hot rolling at 150 &#; for 16 hours, the performance of high-density potassium formate drilling fluid fluctuates little and has the ability of high temperature resistance.


(5) The potassium formate drilling fluid with a density of 2.62g/cm3 still has good lubricity, which is conducive to safe drilling.


High density potassium formate drilling fluid has good lubrication performance, which is of great significance to prevent complex accidents such as differential pressure sticking and safe drilling.

Related articles:
Hydroxypropyl Methylcellulose (HPMC)
Understanding 668 Titanium Dioxide: Key Insights and Uses

shuntong contains other products and information you need, so please check it out.


Potassium formate: Applications and degradation

General description

Potassium formate HCOOK is a salt of formic acid. It is a useful chemical compound in the production of potassium metal and in the oil and gas industry, often in aqueous solution (alone, or mixed with cesium formate). It can be prepared by absorbing carbon monoxide in 50-80% KOH at 100-200°C at a partial pressure of CO > 690kPa. Potassium formate is very soluble in water. The saturated aqueous solution at 18°C contains 76.8% PF by weight. Aqueous solution of PF may be readily manufactured from formic acid and KOH. Potassium formate is already widely in use in the oil-drilling industry and as an ice removing agent for aeroplanes. One remarkable advantage is it is environmentally friendly. Potassium formate also can be prepared by neutralizing a solution of formic acid in methanol with Potassium carbonate. Because the solution contains water, evaporation will normally not result in the crystallization of Potassium formate. However, by drying the solution in a desiccator over P2O5, large prismatic crystals of Potassium formate appeared. Because of their deliquescent nature the crystals had to be handled with considerable care. A specimen 0.5 × 0.6 × 0.6 mm was cut from a large crystal and sealed in a capillary, partly filled with P2O5 [1]. Its appearance is as follows:

Figure 1 Appearance of Potassium formate

Applications

Potassium formate is mainly used to prepare water-bearing oil well injection fluids. In the late s, potassium formate was applied to drilling and completion fluids, especially in high-density drilling and completion fluid systems, and achieved good results. The preparation of drilling fluid system with potassium formate has outstanding advantages such as strong inhibition, good compatibility, environmental protection, and reservoir protection. The on-site application results indicate that potassium formate inhibits the hydration of clay. It has many advantages. The following have already been reported: (i) the biological oxygen demand of formate is lower than that of acetates or urea, (ii) the degradation of formate occurs also at low temperatures, (iii) formate induces less leaching of trace metals from roadsides than do sodium chloride and acetates, and (iv) the taste level of potassium formate in ground water is lower than that of conventional road salt and potassium acetate (CH3COOK) [2]. In our earlier sand and gravel column experiments [3], potassium formate was found to be the least harmful deicing chemical with respect to ground water quality when compared to sodium chloride, calcium chloride (CaCl2), magnesium chloride (MgCl2), calcium magnesium acetate [Ca3Mg7(CH3COO)20], and potassium acetate.

Degradation

Potassium formate can be degradated in the unsaturated zone of a sandy aquifer [4]. The formate was effectively removed (98%) in a sandy lysimeter after a cold winter period. The disappearance of formate was accompanied by the formation of carbon dioxide and bicarbonate in the percolating water indicating biodegradation of formate. Potassium seemed to be adsorbed (99%) in the soil of lysimeter and the ion exchange between potassium and a variety of monovalent and divalent ions in mineral particles in the aquifer material was assumed to be responsible for the leaching of barium, calcium, magnesium, and sodium from the soil material.

If potassium formate is applied as a deicer for several years, potassium may leach into the ground water. The direct application of alkaline potassium formate at high concentrations (50 wt. %) destroyed most of the plants present on the soil surface of the lysimeter. If potassium formate is used for road deicing, impacts on the roadside vegetation are likely to be less critical, however, because of the dilution effect of melt water and precipitation. Nevertheless, further research at field scale is still needed for instance on the impacts of potassium formate on vegetation, road surfaces, and leaching of heavy metals from soil before allowing the widespread use of formate over Finnish shallow sandy aquifers.

References

[1]Bats J W, Fuess H. Potassium formate[J]. Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry, , 36(8): -.

[2]Kivela¨, H., A. Nenonen, T. Nyste&#;n, P. Hellste&#;n, and H. Tuorila. . Alternative de-icing salts taste only when used at high concentration. (In Finnish.) Vesitalous 1:18&#;21.

[3]Hellste&#;n, P., and T. Nyste&#;n. . Migration of alternative de-icers in unsaturated zone of aquifers&#;In vitro study. Water Sci. Technol. 48(9):45&#;50.

[4]Hellstén P P, Kivim?ki A L, Miettinen I T, et al. Degradation of potassium formate in the unsaturated zone of a sandy aquifer[J]. Journal of environmental quality, , 34(5): -.

If you are looking for more details, kindly visit Liquid Potassium Formate.

Comments

0