The Ultimate Guide to Choosing air cooled condensing units exporter

When choosing refrigeration equipment for a new installation, the equipment is selected to provide the required refrigeration effect to either reduce and/or maintain a product&#;s temperature. This capacity is normally stated in Btuh. The unit cooler (evaporator), compressor, and metering device are all selected based on this Btuh requirement for the selected refrigerant. The only major component not selected based on this Btuh requirement is the condenser.

If you are looking for more details, kindly visit Kendall.

A condenser must be selected for the system&#;s total of heat rejection (THR), which is the sum of the heat energy absorbed by the evaporator and the additional heat energy added to the refrigerant by the compressor. This additional heat energy is referred to as the heat of compression. The heat of compression varies with the compressor design, so the compressor manufacturer&#;s information should be used whenever possible. If this information is not available, many condenser manufacturers will provide a reference table to determine that value.

Selecting an air-cooled condenser is not always necessary; many times, a condensing unit is selected for the installation. The condensing unit is selected based on the required Btuh capacity and its condenser is selected by the condensing unit manufacturer. However, systems using a remote air-cooled condenser will need to have the condenser chosen separately.

To begin the selection process, first determine the system&#;s THR by adding in the compressor&#;s heat of compression (obtained from either the compressor manufacturer or a table from the condenser manufacturer). If the condenser will be installed above sea level, a correction factor will need to be applied to the THR. The condenser manufacturer will generally have a table available providing the required correction factors.

Next, calculate the design temperature difference (TD), which is the design condensing temperature minus the design ambient temperature:

Design TD = Condensing temperature - Ambient temperature

Next, for the system&#;s refrigerant type, use the condenser manufacturer&#;s selection chart to choose the condenser based on the THR and at the design temperature difference. Some manufacturers&#; charts may show their condenser&#;s capacity at a 1°F temperature difference. If necessary, you can determine the required TD at 1°F by dividing the THR by the design condenser TD:

THR/°TD = THR ÷ Calculated design condenser TD

If the required THR falls between two condenser capacities on the selection chart, chose the higher of the two. For example, you are selecting a remote air-cooled condenser for a system with a net refrigeration requirement of 225,000 Btuh. The condenser will be installed at sea level, so no factor for altitude correction is required. It is a low temperature system utilizing a R-404A semi-hermetic, suction cooled compressor with a design evaporating temperature of -20°F, an outdoor ambient of 90°F, and design condensing temperature of 110°F. According to the condenser manufacturer&#;s &#;Heat of Compression Factor for Suction Cooled Compressors&#; table, a multiplication factor of 1.55 should be used to determine the THR. Using this factor, the THR will be 348,750 Btuh (225,000 Btuh x 1.55). The design condenser TD will be 20°F (110°F - 90°F). Referencing the condenser manufacturer&#;s selection table for their R-404A condensers, it is possible to select the correct air-cooled condenser for the installation.

Selecting the correct air-cooled condenser for an installation is a vital part of ensuring the system operates properly and at peak efficiency.

When selecting a condensing unit for your refrigeration or HVAC system, several factors must be considered to ensure optimal performance, efficiency, and reliability. The condensing unit is a critical component responsible for removing heat from the refrigerant, making it essential to choose the right unit for your specific application. Here's a comprehensive guide to help you navigate the selection process:

1. Determine Cooling Capacity Requirements:

The cooling capacity of the condensing unit should match the heat load requirements of the application. Calculate the required cooling capacity based on factors such as room size, temperature differential, insulation levels, and anticipated heat gain from equipment and occupants. Oversized or undersized units can lead to inefficiencies, inadequate cooling, or premature wear.

2. Consider Environmental Conditions:

Take into account the environmental conditions in which the condensing unit will operate. Factors such as ambient temperature, humidity levels, altitude, and exposure to corrosive elements can impact the performance and longevity of the unit. Choose a condensing unit with suitable temperature and humidity ratings to ensure reliable operation in varying environmental conditions.

Contact us to discuss your requirements of air cooled condensing units exporter. Our experienced sales team can help you identify the options that best suit your needs.

3. Evaluate Energy Efficiency:

Energy efficiency is crucial for minimizing operating costs and reducing environmental impact. Look for condensing units that meet or exceed energy efficiency standards, such as SEER (Seasonal Energy Efficiency Ratio) for HVAC systems or EER (Energy Efficiency Ratio) for refrigeration systems. High-efficiency units may feature variable-speed compressors, advanced refrigerant technologies, and energy-saving controls.

 Copeland Air-Cooled Scroll Type Condensing Unit (5&#;15&#;)    

4. Select the Right Refrigerant:

Choose a condensing unit compatible with the appropriate refrigerant for your application. Consider factors such as regulatory requirements, environmental considerations, safety concerns, and long-term availability of refrigerants. Opt for units that use environmentally friendly refrigerants with low global warming potential (GWP) and ozone depletion potential (ODP).

5. Assess Noise Levels:

Noise emissions from the condensing unit can affect occupant comfort, especially in residential or commercial settings. Evaluate the noise levels of the unit and select models equipped with noise-reducing features such as sound-insulated enclosures, vibration dampening mounts, and advanced compressor technology. Choose a location for installation that minimizes noise disturbance.

6. Consider Installation and Maintenance Requirements:

Ensure that the condensing unit is compatible with existing infrastructure and installation requirements. Consider factors such as space constraints, accessibility for service and maintenance, electrical requirements, and ventilation needs. Choose units with user-friendly features that simplify installation, commissioning, and routine maintenance tasks.

7. Evaluate Brand Reputation and Warranty:

Research the reputation of the manufacturer and the reliability of their products. Choose condensing units from reputable brands known for quality craftsmanship, product innovation, and customer support. Additionally, consider the warranty coverage provided by the manufacturer, including parts and labor, and ensure it meets your expectations for long-term reliability and peace of mind.

By carefully considering these factors and consulting with industry professionals, you can select the right condensing unit that meets your specific requirements for cooling capacity, energy efficiency, environmental conditions, noise levels, installation, and maintenance. Investing in the appropriate condensing unit ensures optimal performance, longevity, and cost-effectiveness for your refrigeration or HVAC system.

The company is the world’s best air cooled condensing units manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.