Gasket VS O-Ring - General Discussion

Thanks Anthony, I had read that page before publishing but it talks about pressures of 5000 psi which is 300 bars which is 3000 meters deep, the o-rings are the best option without a doubt but in order not to work/spend above the needs of this project, I would like to know if what I am going to need it for, which is 100 meters deep, would there be any other contraindication apart from the pressure to be able to use flat joints, I really like the option of machining with a lathe but I don’t want to waste time on it if I can fix it with a simple gasket.

Want more information on gasket vs o ring? Feel free to contact us.

-Do I have to avoid using flat gaskets?

-Am I going to be safe and try to machine the nut to house the O-Ring or with the specifications of 100 meters depth, will a flat gasket of a suitable material be enough?

Thank you!

O-rings and gaskets are commonly used to create a sealed mating surface between two or more components. They are found in everything from machines and motors to plumbing fixtures and gas pipelines.

When multiple components are joined together, an O-ring or gasket may be installed at the area where they meet. Once installed, the respective component will seal the components so that they don’t leak. While both O-rings and gaskets offer a sealed mating surface, though, they aren’t necessarily the same.

Contact us to discuss your requirements of flat rubber gasket. Our experienced sales team can help you identify the options that best suit your needs.

What Is an O-Ring?

Also known as a packing joint, an O-ring is a type of mechanical seal consisting of a circular-shaped piece of elastomer material. They are designed to create a sealed mating surface that’s resistant to pressure. Some O-rings, in fact, can withstand pressure in excess of 5,000 pounds per square inch (PSI). Even when exposed to severe pressure, O-rings will maintain their integrity while preventing liquids, gas or air from escaping the respective components with which they are used.

Although they are available in a variety of sizes, all O-rings have the same shape. They consist of a looped piece of elastomer material with a hollow center. This circular shape allows O-rings to fit over cylindrical-shaped components, such as pipes and hoses.

What is a Gasket?

A gasket is a mechanical seal consisting of a flat piece of material. By definition, an O-ring is technically a gasket, but not all gaskets are O-rings. O-rings are made exclusively of an elastomer material, resulting in an elastic texture that’s able to stretch and revert back to its natural shape and size without breaking. Gaskets, on the other hand, can be made of any material. Some gaskets are made of an elastomer material. Others, however, are made of harder materials, such as metal. Most automotive engines, for instance, have a head metal gasket that sits between the cylinder head and the engine block.

Gaskets also come in different shapes. O-rings, on the other hand, only come in a circular shape. Many gaskets are designed in a custom shape to fit complex mating surfaces. If a mating surface has four or more components, it may require a custom-shaped gasket rather than a simple O-ring.

In Conclusion

Gaskets and O-rings are both used to create a sealed mating surface between two or more components. O-rings are simply circular-shaped gaskets consisting of an elastomer material, whereas gaskets are flat seals consisting of any material or shape.

For more R37 oil sealinformation, please contact us. We will provide professional answers.